Water Meter Check

The first step is to make sure all water usage is stopped and then to check your water meter for movement. Look at the top of the meter. You'll notice a triangle called a flow indicator. It will move whenever water is passing through it. If your meter doesn't have a flow indicator, you can use the sweep hand on the register to indicate water loss. If either the flow indicator or the sweep hand is moving, you may have a leak and should investigate your property further.

How to Check Your Water Meter

A water meter is a device that measures the volume of water delivered to a property. Checking the water meter can help you determine if there is a water leak.

(Note: Make sure no water is being used inside or outside your home while performing this test).

1: Locate your water meter box and carefully remove the lid. (Be cautious of insects or other small animals).

2: Check your water meter to see if the flow indicator or sweep hand is moving.

3: A moving leak indicator or sweep hand shows that water is either being used or wasted.

4: Be sure to securely reattach the meter lid to prevent trip hazards.

5: If leak is detected, repair leak within 48 hours.